#!/usr/bin/perl
use strict;
use warnings;
use Getopt::Long;

#-----------------------------------------------------------------------------
#----------------------------------- MAIN ------------------------------------
#-----------------------------------------------------------------------------
my $usage = "

Synopsis:

gtf2gff3 --cfg gtf2gff3_MY_CONFIG.cfg gtf_file > gff3_file

gtf2gff3 --help # for a more detailed help message.

Description:

This script will convert GTF formatted files to valid GFF3 formatted
files.  It will map the column 3 (\"type\" column) to valid SO, but
because any non standard term may appear in that column in GTF files,
you may edit the config file to provide your own GTF feature to SO
mapping.  The script will also build gene models from exons, CDSs and
other features given in the GTF file.  It is currently tested on Ensemble
and Twinscan GTF, and it should work on any other files that follow the
same specification.  It does not work on GTF from the UCSC table browser
because those files use the same ID for gene and transcript, so it is
impossible to group multiple transcripts to a gene.  See the README that
came with the script for more info.

Options:

  --cfg   Provide the filename for a config file.  See the configuration
	  file provided with this script for format details.  Use this
	  configuration file to modify the behavior of the script. If no config
	  file is given it looks for ./gtf2gff3.cfg, ~/gtf2gff3.cfg or
	  /etc/gtf2gff3.cfg in that order.

  --help  Provide a more detailed help message.

";

my ($help, $cfg_file);
my $opt_success = GetOptions('help'  => \$help,
			     'cfg=s' => \$cfg_file);

die $usage if ! $opt_success;

if ($help) {
	print `perldoc $0`;
	exit;
}

my $file = shift;
die $usage unless $file;

my $home = $ENV{HOME} || '.'; #Apache has no home, so avoid the error.

my @cfg_files = ($cfg_file,
		 './gtf2gff3.cfg',
		 "$home/gtf2gff3.cfg",
		 '/etc/gtf2gff3.cfg',
		 );
@cfg_files = grep {-e $_ if $_} @cfg_files;
$cfg_file = shift @cfg_files;
$cfg_file ||= '';

################################################################################
# LOAD CONFIGURATION OR USE DEFAULTS
################################################################################

my %config;
eval {
    require Config::Std;
    read_config $cfg_file => my %config if -e $cfg_file;
};
if ($@ =~ /Can't locate/) {
    print STDERR "Config::Std not installed. Will use built-in defaults.\n";
}

our $INPUT_FEATURE_MAP = $config{INPUT_FEATURE_MAP};
$INPUT_FEATURE_MAP ||= {gene		  => 'gene',
			mRNA		  => 'mRNA',
			transcript	  => 'mRNA',
			exon		  => 'exon',
			five_prime_UTR    => 'five_prime_utr',
			five_prime_utr    => 'five_prime_utr',
			start_codon	  => 'start_codon',
			CDS	          => 'CDS',
			stop_codon	  => 'stop_codon',
			three_prime_UTR   => 'three_prime_utr',
			three_prime_utr   => 'three_prime_utr'};

our $GTF_ATTRB_MAP  = $config{GTF_ATTRB_MAP};
$GTF_ATTRB_MAP ||= {gene_id    => 'gene_id',
		    gene_name  => 'gene_name',
		    trnsc_id   => 'transcript_id',
		    trnsc_name => 'transcript_name'};

our $GFF3_ATTRB_MAP = $config{GFF3_ATTRB_MAP};
$GFF3_ATTRB_MAP ||= {gene_id    => 'gene_id',
		     gene_name  => 'gene_name',
		     trnsc_id   => 'transcript_id',
		     trnsc_name => 'transcript_name',
		     id         => 'ID',
		     parent     => 'Parent',
		     name       => 'Name'};

our $LIMIT_ATTRB     = $config{MISC}{LIMIT_ATTRB} || 1;
our $ATTRB_DELIMITER = $config{MISC}{ATTRB_DELIMITER} ? qr{$config{MISC}{ATTRB_DELIMITER}}
                                                      : qr{\s*;\s*};
our $ATTRB_REGEX     = $config{MISC}{ATTRB_REGEX}     ? qr{$config{MISC}{ATTRB_REGEX}}
                                                      : qr{^\s*(\S+)\s+(\"[^\"]*\")\s*$};

our $START_IN_CDS   = $config{MISC}{START_IN_CDS}    || 1;
our $STOP_IN_CDS    = $config{MISC}{STOP_IN_CDS}     || 0;
our $DEFAULT_STRAND = $config{MISC}{DEFAULT_STRAND};
################################################################################

my ($genes, $features) = parse_gtf($file);

$genes = build_genes($genes);

print_gff3($genes, $features);

#-----------------------------------------------------------------------------
#-------------------------------- SUBROUTINES --------------------------------
#-----------------------------------------------------------------------------
sub parse_gtf {

	my $file = shift;
	open (my $IN, '<', $file) or die "FATAL: Can't open GTF file: $file for reading.\n$!\n";

	# %genes will have the following structure:
	# $genes->gene_id->trnsc_id->feature_type->feature
	#                |
	#                ->other->feature_type->feature
	#
	my (%genes, %features);

	while (<$IN>) {

		chomp;
		s/^\s+//;
		s/\s+$//;

		#Handle full line comments, meta-comments and blank lines;

        next if (/^#/);
        
        #Grab any comments
		my ($comment) = $_ =~ s/(\#.*$)//;
					 

		my ($seqname, $source, $feature_type, $start, $end, $score,
		    $strand, $frame, $attrb_text) = split "\t", $_;
		my $attributes = parse_attributes($attrb_text);
		$feature_type = $INPUT_FEATURE_MAP->{$feature_type};

		#Note here that we're mapping between GTF/GFF and GFF3
		#nomeclature for the hash keys
		my $feature = {seq_id     => $seqname,
			       source     => $source,
			       type       => $feature_type,
			       start      => $start,
			       end        => $end,
			       score      => $score,
			       strand     => $strand,
			       phase      => $frame,
			       attributes => $attributes,
			       comment    => $comment};

		#Feature has a gene_id
		if (exists $attributes->{$GTF_ATTRB_MAP->{gene_id}}) {

			my $gene_id = $attributes->{$GTF_ATTRB_MAP->{gene_id}}[0];

			#Feature has a gene ID and transcript ID
			if (exists $attributes->{$GTF_ATTRB_MAP->{trnsc_id}}) {
				my $trnsc_id = $attributes->{$GTF_ATTRB_MAP->{trnsc_id}}[0];
				# fix broken UCSC GTF!
				if ($gene_id eq $trnsc_id) {
				    ($gene_id = $trnsc_id) =~ s/\.\d+$//;
				    $attributes->{gene_id}[0] = $gene_id;
				}
                push @{$genes{$seqname}{$gene_id}{$trnsc_id}{$feature_type}},
				$feature;
			}
			else {
				push @{$genes{$seqname}{$gene_id}{other}{$feature}},
				$feature;
			}

		}
        else {
			push @{$features{$feature_type}}, $feature;
		}
	}
	return (\%genes, \%features);
}
#-----------------------------------------------------------------------------
sub parse_attributes {

	my $attrb_text = shift;

	#Skip it if it's undefined or empty
	return if ! defined $attrb_text || $attrb_text =~ /^\s+$/;

	#Split the attributes
	my @attrb_array = split $ATTRB_DELIMITER, $attrb_text;

	#Grab key, value pairs
	my %attributes;
      ATT:
	for my $attrb (@attrb_array) {
		my ($key, $value);

		if ($attrb =~ $ATTRB_REGEX) {
			($key, $value) = ($1, $2);
			$value =~ s/\"//g if $value !~ /\s/;
		}
		else {
			print STDERR "ERROR:  Missing or non-standard attributes: parse_attributes\n";
			next ATT;
		}
		push @{$attributes{$key}}, $value;
	}
	return \%attributes;
}
#-----------------------------------------------------------------------------
sub build_genes {

	my $genes = shift;

	my @genes;
	for my $seq_id (keys %{$genes}) {
		for my $gene_id (keys %{$genes->{$seq_id}}) {

			my $gene = build_gene($genes->{$seq_id}{$gene_id});
			push @genes, $gene;
		}
	}
	return \@genes;
}
#-----------------------------------------------------------------------------
sub build_gene {

	my $trnscs = shift;

	my @trnscs;
      TRN:
	for my $trnsc_id (keys %{$trnscs}) {

		if ($trnsc_id eq 'other') {
			#Handle non-transcript gene features
			print STDERR "ERROR:  Non-transcript gene feature " .
			  "not supported.  Please contact the author for " .
			    "support: build_gene\n";
			next TRN;
		}
		my $features = $trnscs->{$trnsc_id};
		my $trnsc = build_trnsc($features);
		push @trnscs, $trnsc;
	}

	my $gene = validate_and_build_gene(\@trnscs);
	return $gene;
}
#-----------------------------------------------------------------------------
sub build_trnsc {

	my $features = shift;

	my $exons      = $features->{exon}	        || [];
	my $CDSs       = $features->{CDS}	        || [];
	my $start      = $features->{start_codon}	|| [];
	my $stop       = $features->{stop_codon}	|| [];
	my $five_UTRs  = $features->{five_prime_utr}    || [];
	my $three_UTRs = $features->{three_prime_utr}   || [];

	#We require at least CDSs or exons
	unless (scalar @{$CDSs} || scalar @{$exons}) {
		print STDERR "ERROR: Must have at least exons or CDSs to" .
		  "build a transcript: build_trnsc\n";
		return;
	}

	#Make start codons if they don't exist
	$start = process_start($exons, $CDSs, $start, $five_UTRs)
	    if ! scalar @{$start};
	#Make stop codons if they don't exist
	$stop  = process_stop($exons, $CDSs, $stop, $three_UTRs)
	    if ! scalar @{$stop};

	#Make UTRs, exons and/or CDSs if they don't exist
	($five_UTRs,
	 $exons,
	 $CDSs,
	 $three_UTRs) = process_exon_CDS_UTRs($exons, $CDSs,
					      $start, $stop,
					      $five_UTRs,
					      $three_UTRs);


	$features = {exon              => $exons,
		     five_prime_UTR    => $five_UTRs,
		     start_codon       => $start,
		     CDS               => $CDSs,
		     stop_codon        => $stop,
		     three_prime_UTR   => $three_UTRs};

	#Build and validate the transcripts
	my $trnsc = validate_and_finish_trnsc($features);

	return $trnsc;
}
#-----------------------------------------------------------------------------
sub process_start {
	my ($exons, $CDSs, $start, $five_UTRs) = @_;

	my ($start_codon_start, $start_codon_end);

	my $strand;
	#Get the strand for exons or CDSs
	if (scalar @{$exons}) {
		$strand = strand($exons->[0]->{strand});
	}
	elsif (scalar @{$CDSs}) {
		$strand = strand($CDSs->[0]->{strand});
	}
	else {
		die "FATAL: Need exons or CDSs to build transcripts: " .
		    "process_start.\n";
	}

	#Already have start
	if (scalar @{$start}) {
		return $start;
	}

	################################################################################
	# Don't infer start codons from CDS unless backed by UTR or exon infered UTR
	################################################################################

	#Build start from CDS
	elsif (scalar @{$CDSs} && scalar @{$exons}) {

		$CDSs = sort_features($CDSs, $strand);
		my $first_CDS = $CDSs->[0];

		$exons = sort_features($exons, $strand);
		my $first_exon = $exons->[0];

		if ($strand == 1) {
			if ($first_exon->{start} < $first_CDS->{start}) {
				$start_codon_start = $first_CDS->{start};
				#Move start codon out of CDS if config says to
				if ($START_IN_CDS == 0) {
					$start_codon_start -= 3;
				}
			}
		}
		elsif ($strand == -1) {
			if ($first_exon->{end} > $first_CDS->{end}) {
				$start_codon_start = $first_CDS->{end} - 2;
				#Move start codon out of CDS if config says to
				if ($START_IN_CDS == 0) {
					$start_codon_start += 3;
				}
			}
		}
		$start_codon_end   = $start_codon_start + 2
		  if defined $start_codon_start;
	}
	#Here we assume that if you have 5' UTR and CDS that the start codon
	#must be at the begining of the first CDS.  To be more rigorous we should
	#check the coordinates and be sure that the 5' UTR and CDS are contiguous.
	elsif (scalar @{$CDSs} && scalar @{$five_UTRs}) {

		$CDSs = sort_features($CDSs, $strand);
		my $first_CDS = $CDSs->[0];

		if ($strand == 1) {
			$start_codon_start = $first_CDS->{start};
			#Move start codon out of CDS if config says to
			if ($START_IN_CDS == 0) {
				$start_codon_start -= 3;
			}
		}
		elsif ($strand == -1) {
			$start_codon_start = $first_CDS->{end} - 2;
			#Move start codon out of CDS if config says to
			if ($START_IN_CDS == 0) {
				$start_codon_start += 3;
			}
		}
		$start_codon_end   = $start_codon_start + 2;
	}
	#Build start from UTRs - I haven't seen an example of this yet. Maybe I should
	#only create a start codon if it falls within an exon or CDS.
	elsif (scalar @{$five_UTRs}) {
		die "FATAL: Untested code in process_start.  Contact the aurthor for support\n";
		$five_UTRs = sort_features($five_UTRs, $strand);
		my $last_five_UTR = $five_UTRs->[-1];
		$start_codon_start = $strand == 1 ? $last_five_UTR->{start} + 1 :
		    $last_five_UTR->{end} - 3;
		$start_codon_end   = $start_codon_start + 2;
	}
	#No CDSs or UTRs - let's pretend it's non-coding
	elsif (scalar @{$exons}) {
		return [];
	}
	else {
	    return []; # We don't really need to die here some annotations have stop_codon, but not start_codon
	    # die "FATAL: Invalid feature set: process_start\n";
	}

	return [] if (! defined $start_codon_start ||
		      ! defined $start_codon_end);

	$start = [{start => $start_codon_start,
		   end   => $start_codon_end,
		   type  => 'start_codon',
		   score => '.',
		   phase => '0'}];

	return $start;
}
#-----------------------------------------------------------------------------
sub process_stop {
	my ($exons, $CDSs, $stop, $three_UTRs) = @_;

	my ($stop_codon_start, $stop_codon_end);

	#Get the strand
	my $strand;
	if (scalar @{$exons}) {
		$strand = strand($exons->[0]->{strand});
	}
	elsif (scalar @{$CDSs}) {
		$strand = strand($CDSs->[0]->{strand});
	}
	else {
		die "FATAL: Need exons or CDSs to build transcripts: " .
		    "process_stop\n";
	}

	#If we already have a stop then return it.
	if (scalar @{$stop}) {
		return $stop;
	}

	################################################################################
	# Don't infer stop codons from CDS unless backed by UTR or exon infered UTR
	################################################################################

	#Build stop from CDSs
	elsif (scalar @{$CDSs}) {

		$CDSs = sort_features($CDSs, $strand);
		my $last_CDS = $CDSs->[-1];

		$exons = sort_features($exons, $strand);
		my $last_exon = $exons->[0];

		if ($strand == 1) {
			if ($last_exon->{end} > $last_CDS->{end}) {
				$stop_codon_start = $last_CDS->{end} - 2;
				#Move stop codon out of CDS is config says to
				if ($STOP_IN_CDS == 0) {
					$stop_codon_start += 3;
				}
			}
		}
		elsif ($strand == -1) {
			if ($last_exon->{start} < $last_CDS->{start}) {
				$stop_codon_start = $last_CDS->{start};
				#Move stop codon out of CDS is config says to
				if ($STOP_IN_CDS == 0) {
					$stop_codon_start -= 3;
				}
			}
		}

		$stop_codon_end   = $stop_codon_start + 2
		  if defined $stop_codon_end;
	}
	elsif (scalar @{$CDSs} && scalar @{$three_UTRs}) {

		$CDSs = sort_features($CDSs, $strand);
		my $last_CDS = $CDSs->[-1];

		if ($strand == 1) {
			$stop_codon_start = $last_CDS->{end} - 2;
			#Move stop codon out of CDS is config says to
			if ($STOP_IN_CDS == 0) {
				$stop_codon_start += 3;
			}
		}
		elsif ($strand == -1) {
			$stop_codon_start = $last_CDS->{start};
			#Move stop codon out of CDS is config says to
			if ($STOP_IN_CDS == 0) {
				$stop_codon_start -= 3;
			}
		}
		$stop_codon_end   = $stop_codon_start + 2;
		}
	#Build stop from UTRs
	elsif (scalar @{$three_UTRs}) {
		die("FATAL: Untested code: process_stop.\n");

		my $strand = strand($three_UTRs->[0]);
		$three_UTRs = sort_features($three_UTRs, $strand);
		my $first_three_UTR = $three_UTRs->[0];
		$stop_codon_start = $strand == 1 ? $first_three_UTR->{start} - 3 :
		    $first_three_UTR->{end} + 1;

		$stop_codon_end   = $stop_codon_start + 2;
	}
	elsif (scalar @{$exons}) {
		#Treating this as a non-coding transcript
		return [];
	}
	else {
	    # We don't really need to die here.  Some features may have
	    # start_codon, but not stop_codon
	    return [];
	    #die "FATAL: Invalid feature set: process_stop\n";
	}

	return [] if (! defined $stop_codon_start ||
		      ! defined $stop_codon_end);

	$stop = [{start => $stop_codon_start,
		  end   => $stop_codon_end,
		  type  => 'stop_codon',
		  score => '.',
		  phase => '0'}];

	return $stop;
}
#-----------------------------------------------------------------------------
sub process_exon_CDS_UTRs {
	my ($exons, $CDSs, $start, $stop,
	    $five_UTRs, $three_UTRs) = @_;

	#Check what features we already have so we don't rebuild them
	my $have_five_UTRs++  if scalar @{$five_UTRs};
	my $have_exons++      if scalar @{$exons};
	my $have_start++      if scalar @{$start};
	my $have_CDSs++       if scalar @{$CDSs};
	my $have_stop++       if scalar @{$stop};
	my $have_three_UTRs++ if scalar @{$three_UTRs};

	#If CDSs already exist make sure that they include start and stop codons
	if (scalar @{$CDSs}) {
		include_terminal_codons($CDSs, $start, $stop);
	}

	#If we already have everything, then return
	if ($have_exons && $have_CDSs && ($have_five_UTRs || $have_three_UTRs)) {
		return ($five_UTRs, $exons, $CDSs, $three_UTRs);
	}
	#Build CDSs && UTRs
	elsif ($have_exons && ($have_start || $have_stop || $have_CDSs ||
			       $have_three_UTRs || $have_five_UTRs)) {
		# Make sure that evaluate exons can handle only a start OR a stop!!!
		for my $exon (@{$exons}) {
			my ($five_UTR, $CDS, $three_UTR) =
			    evaluate_exon($exon, $start->[0], $stop->[0]);
			push @{$five_UTRs}, $five_UTR
			    if scalar keys %{$five_UTR} && ! $have_five_UTRs;
			push @{$CDSs}, $CDS if scalar keys %{$CDS} && ! $have_CDSs;
			push @{$three_UTRs}, $three_UTR
			    if scalar keys %{$three_UTR} && ! $have_three_UTRs;
		}
	}
	#Build exons
	elsif (!$have_exons && $have_CDSs){
		$exons = build_exons($five_UTRs, $start, $CDSs, $stop, $three_UTRs);
	}
	#Treat as non-coding even if we have a start or stop but not both
	elsif ($have_exons && ! $have_CDSs && ! $have_five_UTRs &&
	       ! $have_three_UTRs && ! $have_start && ! $have_stop) {
		#Treating this as a non_coding transcript
		return ($five_UTRs, $exons, $CDSs, $three_UTRs);
	}
	else {
		die "FATAL: Invalid feature set: process_exon_CDS_UTR\n";
	}

	return ($five_UTRs, $exons, $CDSs, $three_UTRs);
}
#-----------------------------------------------------------------------------
sub include_terminal_codons {
	my ($CDSs, $start, $stop) = @_;

	my $strand = strand($CDSs->[0]{strand});

	$CDSs = sort_features($CDSs, $strand);
	my $first_CDS = $CDSs->[0];
	my $last_CDS  = $CDSs->[-1];

	if ($strand == 1) {
		if (scalar @{$start}) {
			$first_CDS->{start} = $start->[0]{start}
			if $start->[0]{end} + 1 == $first_CDS->{start};
			}
#START_IN_CDS was considered when start was built, so it could introduce errors
#to consider it again here
#		elsif (defined $START_IN_CDS) {
#			$first_CDS->{start} -= 3 if ! $START_IN_CDS;
#		}

		if (scalar @{$stop}) {
			$last_CDS->{end} = $stop->[0]{end}
			if $stop->[0]{start} - 1 == $last_CDS->{end};
		}

#STOP_IN_CDS was considered when stop was built, so it could introduce errors
#to consider it again here
#		elsif (defined $STOP_IN_CDS) {
#			$last_CDS->{end} += 3 if ! $STOP_IN_CDS;
#		}
	}
	elsif ($strand == -1) {
		if (scalar @{$start}) {
			$first_CDS->{end} = $start->[0]{end}
			if $start->[0]{start} - 1 == $first_CDS->{end};
			}
#START_IN_CDS was considered when start was built, so it could introduce errors
#to consider it again here
#		elsif (defined $START_IN_CDS) {
#			$first_CDS->{end} += 3 if ! $START_IN_CDS;
#		}

		if (scalar @{$stop}) {
			$last_CDS->{start} = $stop->[0]{start}
			if $stop->[0]{end} + 1 == $last_CDS->{start};
		}
#STOP_IN_CDS was considered when stop was built, so it could introduce errors
#to consider it again here
#		elsif (defined $STOP_IN_CDS) {
#			$last_CDS->{start} -= 3 if ! $STOP_IN_CDS;
#		}
	}
}
#-----------------------------------------------------------------------------
sub evaluate_exon {
	my ($exon, $start, $stop) = @_;

	my $strand = strand($exon);

	my %five_UTR;
	my %CDS;
	my %three_UTR;

	#######################################
	# Allow success if missing either start or stop
	#######################################

	if ($strand == 1) {
		#Exon is fully 5' UTR
		if (defined $start->{start} &&
		    $exon->{end} <= $start->{start}) {
			$five_UTR{start} = $exon->{start};
			$five_UTR{end}   = $exon->{end};
		}
		#Exon stradles start codon
		elsif (defined $start->{start}           &&
		       $exon->{start} <  $start->{start} &&
		       $exon->{end}   >  $start->{start}     ) {
			$five_UTR{start} = $exon->{start};
			$five_UTR{end}   = $start->{start} - 1;
			if (defined $stop->{start}) {
				$CDS{start}      = $start->{start};
				$CDS{end}        = $exon->{end};
				$CDS{phase}      = 0;
			}
		}
		#Exon is fully CDS
		elsif (defined $start->{start}           &&
		       defined $stop->{end}              &&
		       $exon->{start} >= $start->{start} &&
		       $exon->{end}   <= $stop->{end}        ) {
			$CDS{start}      = $exon->{start};
			$CDS{end}        = $exon->{end};
			#Set phase if this is first CDS
			if ($exon->{start} == $start->{end} + 1  ||
			    $exon->{start} == $start->{start}    ) {
				$CDS{phase} = 0;
			}
		}
		#Exon stradles stop codon
		elsif (defined $stop->{end}              &&
		       $exon->{start} <  $stop->{end}    &&
		       $exon->{end}   >  $stop->{end}        ) {
			$three_UTR{start} = $stop->{end} + 1;
			$three_UTR{end}   = $exon->{end};
			if (defined $start->{start}) {
				$CDS{start}       = $exon->{start};
				$CDS{end}         = $stop->{end};
			}
		}
		#Exon is fully 3' UTR
		elsif (defined $stop->{end} &&
		       $exon->{start} >= $stop->{end}) {
			$three_UTR{start} = $exon->{start};
			$three_UTR{end}   = $exon->{end};
		}
		else {
#			die "Fatal error in evaluate_exon\n";
		}
	}
	else {
		#Exon is fully 5' UTR
		if (defined $start->{end} &&
		    $exon->{start} >= $start->{end}) {
			$five_UTR{start} = $exon->{start};
			$five_UTR{end}   = $exon->{end};
		}
		#Exon stradles start codon
		elsif (defined $start->{end}            &&
		       $exon->{start} < $start->{end}   &&
		       $exon->{end}   > $start->{end}      ) {
			$five_UTR{start} = $start->{end} + 1;
			$five_UTR{end}   = $exon->{end};
			if (defined $stop->{start}) {
				$CDS{start} = $exon->{start};
				$CDS{end}   = $start->{end};
			}
			$CDS{phase} = 0;
		}
		#Exon is fully CDS
		elsif (defined $start->{end}              &&
		       defined $stop->{start}             &&
		       $exon->{end}  <= $start->{end}  &&
		       $exon->{start} >= $stop->{start}    ) {
			$CDS{start} = $exon->{start};
			$CDS{end} = $exon->{end};
			#Set phase 0 if this is first CDS
			if ($exon->{end} == $start->{start} - 1  ||
			    $exon->{end} == $start->{end}    ) {
				$CDS{phase} = 0;
			}
		}
		#Exon stradles stop codon
		elsif (defined $stop->{start}           &&
		       $exon->{end}   > $stop->{start}  &&
		       $exon->{start} < $stop->{start}     ) {
			$three_UTR{start} = $exon->{start};
			$three_UTR{end}   = $stop->{start} - 1;
			if (defined $start->{end}) {
				$CDS{start} = $stop->{start};
				$CDS{end}   = $exon->{end};
			}
		}
		#Exon is fully 3' UTR
		elsif (defined $stop->{start} &&
		       $exon->{end} <= $stop->{start}) {
			$three_UTR{start} = $exon->{start};
			$three_UTR{end}   = $exon->{end};
		}
		else {
#			die "Fatal error in evaluate_exon\n";
		}
	}
		return (\%five_UTR, \%CDS, \%three_UTR);
}
#-----------------------------------------------------------------------------
sub build_exons {
	my ($five_UTRs, $start, $CDSs, $stop, $three_UTRs) = @_;

	my $strand = $CDSs->[0]{strand};

	my @exons;

	#Make an exon for every 5' UTR
	for my $five_UTR (@{$five_UTRs}) {
		push @exons, {start => $five_UTR->{start},
			      end   => $five_UTR->{end},
			      type  => 'exon',
			      score      => '.',
			      strand     => $strand,
			      phase      => '.'};
	}

	#Make and exon for every CDS
	$CDSs = sort_features($CDSs);
	for my $CDS (@{$CDSs}) {
		my $exon = {start => $CDS->{start},
			    end   => $CDS->{end},
			    type  => 'exon',
			    score      => '.',
			    strand     => $strand,
			    phase      => '.'};

#START_IN_CDS and STOP_IN_CDS were already considered when start and stop were
#constructed and CDSs were adjusted in include_terminal_codons
=head1
		if ($i == 0          &&
		    $START_IN_CDS == 0) {
			if ($strand == 1) {
				$exon->start = $start->[0]{start};
			}
			else {
				$exon->end = $start->[0]{end};
			}
		}
		if ($i == (scalar @{$CDSs} - 1) &&
		    $STOP_IN_CDS == 0) {
			if ($strand == 1) {
				$exon->{end} = $stop->[0]{end};
			}
			else {
				$exon->{start} = $stop->[0]{start}
			}
		}
=cut

		push @exons, $exon;
	}

	#Make an exon for every 3' UTR
	for my $three_UTR (@{$three_UTRs}) {
		push @exons, {start => $three_UTR->{start},
			      end   => $three_UTR->{end},
			      type  => 'exon',
			      score      => '.',
			      strand     => $strand,
			      phase      => '.'};
	}

	#Merge any contiguous exons (i.e. from UTR & CDS neighbors)
	my $exons = sort_features(\@exons, 1);
	my @merged_exons = shift @{$exons};
	while (my $exon = shift @{$exons}) {
			if ($exon->{start} <= $merged_exons[-1]{end} + 1) {
				$merged_exons[-1]{end} = $exon->{end};
			}
			else {
				push @merged_exons, $exon;
			}
	}
	return \@merged_exons;
}
#-----------------------------------------------------------------------------
sub validate_and_finish_trnsc {
	my $features = shift;

	my ($seq_id, $source, $strand, $gene_id, $gene_name,
	    $trnsc_id, $trnsc_name);

	#Find default parameters from either exons or CDSs
      TYPE:
	for my $type ( qw|exon CDS| ) {
		for my $feature (@{$features->{$type}}) {
			$seq_id     ||= $feature->{seq_id};
			$source     ||= $feature->{source};
			$strand     ||= $feature->{strand};
			$gene_id    ||=
			    $feature->{attributes}{$GTF_ATTRB_MAP->{gene_id}};
			$gene_name  ||=
			    $feature->{attributes}{$GTF_ATTRB_MAP->{gene_name}};
			$trnsc_id   ||=
			    $feature->{attributes}{$GTF_ATTRB_MAP->{trnsc_id}};
			$trnsc_name ||=
			    $feature->{attributes}{$GTF_ATTRB_MAP->{trnsc_name}};
			last TYPE if ! grep {! defined $_} ($seq_id, $source,
							    $strand, $gene_name,
							    $trnsc_id, $trnsc_name);
		}
	}


	#Flag if we have any coding features (CDS, start_codon, stop_codon)
	my $coding_flag;
	#Min and max for transcript boundaries
	my ($min, $max);
	for my $feature_type (keys %{$features}) {
		my $count;

		#For keeping track of the phase for the next CDS.
		my $next_phase = '.';

		#Sort the features
		$features->{$feature_type} =
		    sort_features($features->{$feature_type},
				  strand($strand));
		for my $feature (@{$features->{$feature_type}}) {

			#min and max to calculate transcript boundaries
			$min = ! defined $min        ?
			    $feature->{start}        :
			    $min > $feature->{start} ?
			    $feature->{start}        :
			    $min;

			$max = ! defined $max        ?
			    $feature->{end}          :
			    $max < $feature->{end}   ?
			    $feature->{end}          :
			    $max;

			#Set the flag if we see indications of coding features
			if (grep {$feature_type eq $_} qw(CDS start_codon
							  stop_codon)) {
				$coding_flag++ if  $feature->{start};
			}

			#Calculate CDS phases.
			if ($feature_type eq 'CDS') {
				($feature, $next_phase) = CDS_phase($feature, $next_phase);
			}

			#Set parameters to defaults for all features that
			#don't already have them set
			if (! defined $feature->{seq_id}) {
				$feature->{seq_id} = $seq_id;
			}
			elsif ($feature->{seq_id} ne $seq_id) {
				print STDERR "ERROR: seq_id conflict: " .
				  "validate_and_finish_trnsc\n";
			}
			if (! defined $feature->{source}) {
				$feature->{source} = $source;
			}
			elsif ($feature->{source} ne $source) {
				print STDERR "ERROR: source conflict: " .
				  "validate_and_finish_trnsc\n";
			}
			if (! defined $feature->{type}) {
				$feature->{type} = $feature_type;
			}
			elsif ($feature->{type} ne $feature_type) {
				print STDERR "ERROR: type conflict: " .
				  "validate_and_finish_trnsc\n";
			}
			if (! defined $feature->{strand}) {
				$feature->{strand} = $strand;
			}
			elsif ($feature->{strand} ne $strand) {
				print STDERR "ERROR: strand conflict: " .
				  "validate_and_finish_trnsc\n";
			}
			if (! defined $feature->{score}) {
				$feature->{score} = '.';
			}
			if (! defined $feature->{phase}) {
				$feature->{phase} = '.';
			}
			#Set attributes
			$feature->{attributes} =
			{parent => $trnsc_id,
			 id     => ["$feature_type:" . $trnsc_id->[0] .
				    ":" . ++$count]};
		}
	}

	my $trnsc_type = $coding_flag ? 'mRNA' : 'transcript';

	my $attributes = {parent      => $gene_id,
			  parent_name => $gene_name,
			  id          => $trnsc_id,
			  name        => $trnsc_name};

	my $trnsc = {seq_id     => $seq_id,
		     source     => $source,
		     type       => $trnsc_type,
		     start      => $min,
		     end        => $max,
		     score      => '.',
		     strand     => $strand,
		     phase      => '.',
		     attributes => $attributes,
		     features   => $features};

	return $trnsc;
}
#-----------------------------------------------------------------------------
sub CDS_phase {
	my ($feature, $next_phase) = @_;

	#If phase isn't already valid assign it
	if (! defined $feature->{phase} ||
	    $feature->{phase} !~ /^0|1|2$/) {
		$feature->{phase} = $next_phase;
	}
	#If phase is valid, calculate the next phase
	if ($feature->{phase} =~ /^0|1|2$/) {
		my $length = ($feature->{end} -
			      $feature->{start}) + 1;
		# my $hang_3 = $length % 3; # 3' overhang
		# my $hang_5 = 3 - $hang_3; # 5' overhang
		#
		# #The next phase is equal to this phase
		# #plus the modulus 3 of the length wrapped
		# #at 2.
		# $next_phase = $feature->{phase} + $hang_5;
		# $next_phase -= 3 if $next_phase > 2;

		# This was update 5/24/10 in response to an
		# e-mail from Leighton Prichard regarding
		# errors in the GFF3 spec.  The code above
		# calculates the phase correctly, but the
		# formula suggested by Leighton is cleaner.

		$next_phase = ($feature->{phase} - $length) % 3;

	}

	return ($feature, $next_phase);
}
#-----------------------------------------------------------------------------
sub validate_and_build_gene {
	my $trnscs = shift;

	#Get parameter defaults
	my $seq_id     = $trnscs->[0]{seq_id};
	my $source     = $trnscs->[0]{source};
	my $strand     = $trnscs->[0]{strand};
	my $gene_id    = $trnscs->[0]{attributes}{parent};
	my $gene_name  = $trnscs->[0]{attributes}{parent_name};

	#Get gene boundaries and check all transcripts for agreement with
	#parameter defaults
	my ($min, $max);
	for my $trnsc (@{$trnscs}) {
		$min = ! defined $min      ?
		    $trnsc->{start}        :
		    $min > $trnsc->{start} ?
		    $trnsc->{start}        :
		    $min;

		$max = ! defined $max      ?
		    $trnsc->{end}          :
		    $max < $trnsc->{end}   ?
		    $trnsc->{end}          :
		    $max;

		print STDERR "ERROR: seq_id conflict: " .
		  "validate_and_build_gene\n" if $seq_id ne $trnsc->{seq_id};
		print STDERR "ERROR: sourc`e conflict: " .
		  "validate_and_build_gene\n" if $source ne $trnsc->{source};
		print STDERR "ERROR: strand conflict: " .
		  "validate_and_build_gene\n" if $strand ne $trnsc->{strand};
		print STDERR "ERROR: gene_id conflict: " .
		  "validate_and_build_gene\n" if $gene_id->[0] ne 
		    $trnsc->{attributes}{parent}[0];

	}
	my $attributes = {id   => $gene_id,
			  name => $gene_name};

	my $gene = {seq_id     => $seq_id,
		    source     => $source,
		    type       => 'gene',
		    start      => $min,
		    end        => $max,
		    score      => '.',
		    strand     => $strand,
		    phase      => '.',
		    attributes => $attributes,
		    trnscs     => $trnscs};

	return $gene;
}
#-----------------------------------------------------------------------------
sub print_gff3 {
	my $genes = shift;

	#GFF3 Header here
	print "##gff-version 3\n";

	for my $gene (@{$genes}) {
		print_gene($gene);
	}

	print_features($features) if scalar keys %{$features};
}
#-----------------------------------------------------------------------------
sub print_gene {
	my $gene = shift;

	my $attrb_text = make_attribute_text($gene->{attributes});
	$attrb_text   .= ";Name=$gene->{attributes}{id}[0]";
	print join "\t", ($gene->{seq_id},
			  $gene->{source},
			  $gene->{type},
			  $gene->{start},
			  $gene->{end},
			  $gene->{score},
			  $gene->{strand},
			  $gene->{phase},
			  $attrb_text,
			  );
	print " " . $gene->{comment} if $gene->{comment};
	print "\n";

	for my $trnsc (@{$gene->{trnscs}}) {
		print_trnsc($trnsc);
	}
}
#-----------------------------------------------------------------------------
sub print_trnsc {
	my $trnsc = shift;

	my $attrb_text = make_attribute_text($trnsc->{attributes});
	print join "\t", ($trnsc->{seq_id},
			  $trnsc->{source},
			  $trnsc->{type},
			  $trnsc->{start},
			  $trnsc->{end},
			  $trnsc->{score},
			  $trnsc->{strand},
			  $trnsc->{phase},
			  $attrb_text,
			  );
	print " " . $trnsc->{comment} if $trnsc->{comment};
	print "\n";

	print_features($trnsc->{features});
}
#-----------------------------------------------------------------------------
sub print_features {
	my $features = shift;

	my @sorted_feature_types = sort_feature_types($features);
	for my $feature_type (@sorted_feature_types) {
		$features->{$feature_type} =
		    sort_features($features->{$feature_type});
		for my $feature (@{$features->{$feature_type}}) {
			my $attrb_text =
			    make_attribute_text($feature->{attributes});
			print join "\t", ($feature->{seq_id},
					  $feature->{source},
					  $feature->{type},
					  $feature->{start},
					  $feature->{end},
					  $feature->{score},
					  $feature->{strand},
					  $feature->{phase},
					  $attrb_text,
					  );
			print " " . $feature->{comment} if
			    $feature->{comment};
			print "\n";
		}
	}
}
#-----------------------------------------------------------------------------
sub make_attribute_text {
	my $attributes = shift;

	#Only print the attributes listed in $LIMIT_ATTRB
	my @tags = $LIMIT_ATTRB ? 
	    grep {exists $GFF3_ATTRB_MAP->{$_}} keys %{$attributes} :
	    keys %{$attributes};

	my %order = (id     => 1,
		     name   => 2,
		     parent => 3,
		     );

	my @pairs;
	for my $tag (sort {$order{$a} || 999 <=> $order{$b} || 999} @tags) {
	    next unless $attributes->{$tag};
	    my $tag_text = $GFF3_ATTRB_MAP->{$tag} || $tag;
	    my $value_text = join ',', @{$attributes->{$tag}};
	    my $pair_text = join '=', ($tag_text, $value_text);
	    push @pairs, $pair_text;
	}
	my $attrb_text = join ';', @pairs;
	return $attrb_text;
}
#-----------------------------------------------------------------------------
sub sort_features {
	my ($features, $strand) = @_;

	$strand = strand($strand) || strand($features->[0]);

	#Make sure we get the array ref that we wanted
	if (ref $features eq 'ARRAY') {
		#If we get an array ref with more than one element - sort it
		if (scalar @{$features} > 1) {
			#Sort + strand features
			if ($strand == 1) {
				my @sorted_features = sort {$a->{start} <=> $b->{start}}
				@{$features};
				$features = \@sorted_features;
				return $features;
			}
			#Sort - strand features
			elsif ($strand == -1) {
				my @sorted_features = sort {$b->{end} <=> $a->{end}}
				@{$features};
				$features = \@sorted_features;
				return $features;
			}
		}
		#Empty or 1 length array just return it
		else {
			return $features;
		}
	}
	#Don't allow someone to misuse sort_features - require array ref
	else {
		die "FATAL: Array reference required: sort_features.\n";
	}
}
#-----------------------------------------------------------------------------
sub sort_feature_types {
	my ($feature_types) = @_;

	#Make sure we get the hash ref that we wanted
	if (ref $feature_types eq 'HASH') {
		my @types = keys %{$feature_types};
		@types = grep{scalar @{$feature_types->{$_}} > 0} @types;
		my $strand;
		for my $type (@types) {
			if (defined $feature_types->{$type}[0]{strand}) {
				$strand = $feature_types->{$type}[0]{strand};
				last;
			}
		}
		$strand = strand($strand);
		die "FATAL: Can't determine strand in: sort_feature_types.\n"
		    if ! defined $strand;

		#If we get an hash ref with more than one element - sort it
		if (scalar keys %{$feature_types} > 1) {
			#Sort + strand features
			if ($strand == 1) {
				my @sorted_types =
				    sort {
					  min_feature($feature_types->{$a}, 'start') <=>
					  min_feature($feature_types->{$b}, 'start')
					  ||
					  min_feature($feature_types->{$a}, 'end') <=>
					  min_feature($feature_types->{$b}, 'end')
					 } @types;
				return @sorted_types;
			}
			#Sort - strand features
			elsif ($strand == -1) {
				my @sorted_types =
				    sort {
					  max_feature($feature_types->{$b}, 'start') <=>
					  max_feature($feature_types->{$a}, 'start')
					  ||
					  max_feature($feature_types->{$b}, 'end') <=>
					  max_feature($feature_types->{$a}, 'end')
					 } @types;
				return @sorted_types;
			}
		}
		#Empty or 1 length hash just return it
		else {
			return keys %{$feature_types};
		}
	}
	#Don't allow someone to misuse sort_features - require array ref
	else {
		die "FATAL: Hash reference required: sort_feature_types.\n";
	}
}
#-----------------------------------------------------------------------------
sub strand {
    my $feature = shift;
    
    my $strand = ref $feature ? $feature->{strand} : $feature;
    
    #If strand is undefined or invalid...
    if (! defined $strand || $strand !~ /\+|-|1|-1/) {
	# ...and if we have a default value then use it...
	if ($DEFAULT_STRAND) {
	    $strand = $DEFAULT_STRAND;
	}
	else {
	    # ...otherwise allow undefined to pass through..
	    return $strand if ! defined $strand;
	}
    }
    
    if ($strand eq '+') {
	return 1;
    }
    elsif ($strand eq '-') {
	return -1;
    }
    elsif ($strand == 1 || $strand == -1) {
	return $strand;
    }
    # ...finally if all else fails die
    die "FATAL: Invalid value passed to strand: $strand.";
}
#-----------------------------------------------------------------------------
sub min_feature {
	my ($features, $terminus) = @_;

	my $min;

	for my $feature (@{$features}) {
		$min ||= $feature->{$terminus};
		$min = $feature->{$terminus} if $min > $feature->{$terminus};
	}
	return $min;
}
#-----------------------------------------------------------------------------
sub max_feature {
	my ($features, $terminus) = @_;

	my $max;

	for my $feature (@{$features}) {
		$max ||= $feature->{$terminus};
		$max = $feature->{$terminus} if $max < $feature->{$terminus};
	}
	return $max;
}
#-----------------------------------------------------------------------------

=head1 NAME

gtf2gff3

=head1 VERSION

This document describes version 0.1

=head1 SYNOPSIS

gtf2gff3 --cfg gtf2gff3_MY_CONFIG.cfg gtf_file > gff3_file

=head1 DESCRIPTION

This script will convert GTF formatted files to valid GFF3 formatted
files.  It will map the value in column 3 (\"type\" column) to valid
SO, but because many non standard term may appear in that column in GTF
files, you may edit the config file to provide your own GTF feature to
SO mapping.  The script will also build gene models from exons, CDSs
and other features given in the GTF file.  It is currently tested on
Ensemble and Twinscan GTF, and it should work on any other files that
follow the same specification.  It does not work on GTF from the UCSC
table browser because those files use the same ID for gene and
transcript, so it is impossible to group multiple transcripts to a
gene.  See the README that came with the script for more info.

=head1 OPTIONS:

=over

=item --cfg

Provide the filename for a config file.  See the configuration file
provided with this script for format details.  Use this configuration
file to modify the behavior of the script. If no config file is given
it looks for ./gtf2gff3.cfg, ~/gtf2gff3.cfg or /etc/gtf2gff3.cfg in
that order.

=item --help

Provide a detailed man page style help message and then exit.

=back

=head1 DIAGNOSTICS

=over

=item C<< ERROR: Missing or non-standard attributes: parse_attributes >>

A line in the GTF file did not have any attributes, or it's attributes column
was unparsable.

=item C<< ERROR: Non-transcript gene feature not supported.  Please contact the author for support: build_gene >>

This warning indicates that a line was skipped because it contained a
non-transcript gene feature, and the code is not currently equipped to
handle this type of feature.  This probably isn't too hard to add, so
contact me if you get this error and would like to have these features
supported.

=item C<< ERROR: Must have at least exons or CDSs to build a transcript: build_trnsc >>

Some feature had a transcript_id and yet there were no exons or CDSs
associated with that transcript_id so the script failed to build a
transcript.

=item C<< ERROR: seq_id conflict: validate_and_finish_trnsc >>

Found two features within the same transcript that didn't share the
same seq_id.

=item C<< ERROR: source conflict: validate_and_finish_trnsc >>

Found two features within the same transcript that didn't share the
same source.

=item C<< ERROR: type conflict: validate_and_finish_trnsc >>

Found two features within the same transcript that were expected to
share the same type and yet they didn't.

=item C<< ERROR: strand conflict: validate_and_finish_trnsc >>

Found two features within the same transcript that didn't share the
same strand.

=item C<< ERROR: seq_id conflict: validate_and_build_gene >>

Found two features within the same gene that didn't share the same
seq_id.

=item C<< ERROR: source conflict: validate_and_build_gene >>

Found two features within the same gene that didn't share the same
source.

=item C<< ERROR: strand conflict: validate_and_build_gene >>

Found two features within the same gene that didn't share the same
strand.

=item C<< ERROR: gene_id conflict: validate_and_build_gene >>

Found two features within the same gene that didn't share the same
gene_id.

=item C<< FATAL: Can't open GTF file: file_name for reading. >>

Unable to open the GTF file for reading.

=item C<< FATAL: Need exons or CDSs to build transcripts: process_start >>

A start_codon feature was annotated and yet there were no exons or
CDSs associated with that transcript_id so the script failed.

=item C<< FATAL: Untested code in process_start.  Contact the aurthor for support. >>

The script is written to infer a start codon based on the presence of
a 5' UTR, but we had no example GTF of this type when we wrote the
code, so we killed process rather than run untested code.  Contact the
author for support.

=item C<< FATAL: Invalid feature set: process_start >>

We tried to consider all possible ways of infering a start codon or
infering a a non-coding gene, and yet we've failed.  Your combination
of gene features doesn't make sense to us.  You should never get
this error, and if you do, we'd really like to see the GTF file that
generated it.  Please contact the author for support.

=item C<< FATAL: Need exons or CDSs to build transcripts: process_stop >>

A stop_codon feature was annotated and yet there were no exons or
CDSs associated with that transcript_id so the script failed.

=item C<< FATAL: Untested code in process_stop.  Contact the aurthor for support. >>

The script is written to infer a stop codon based on the presence of
a 3' UTR, but we had no example GTF of this type when we wrote the
code, so we killed process rather than run untested code.  Contact the
author for support.

=item C<< FATAL: Invalid feature set: process_stop >>

We tried to consider all possible ways of infering a stop codon or
infering a a non-coding gene, and yet we've failed.  Your combination
of gene features doesn't make sense to us.  You should never get
this error, and if you do, we'd really like to see the GTF file that
generated it.  Please contact the author for support.

=item C<< FATAL: Invalid feature set: process_exon_CDS_UTR >>

We tried to consider all possible ways of infering exons, CDSs and
UTRs and yet we've failed.  Your combination of gene features doesn't
make sense to us.  You really should ever get this error, and if you
do, we'd really like to see the GTF file that generated it.  Please
contact the author for support.

=item C<< FATAL: Array reference required: sort_features. >>

A user shouldn't be able to trigger this error.  It almost certainly
indicates a software bug.  Please contact the author.

=item C<< FATAL: Can't determine strand in: sort_feature_types. >>

This may indicate that your GTF file does not indicate the strand for
features that require it.  It may also indicate a software bug.
Please contact the author.

=item C<< FATAL: Hash reference required: sort_feature_types. >>

A user shouldn't be able to trigger this error.  It almost certainly
indicates a software bug.  Please contact the author.

=item C<< FATAL: Invalid value passed to strand: strand.  >>

This may indicate that your GTF file does not indicate the strand for
features that require it.  Consider using the DEFAULT_STRAND paramater
in the config file.  It may also indicate a software bug.  Please
contact the author.

=back

=head1 CONFIGURATION AND ENVIRONMENT

A configuration file is provided with this script.  The script will
look for that configuration file in ./gtf2gff3.cfg, ~/gtf2gff3.cfg
or /etc/gtf2gff3.cfg in that order.  If the configuration file is not
found in one of those locations and one is not provided via the --cfg
flag it will try to choose some sane defaults, but you really should
provide the configuration file.  See the supplied configuration file
itself as well as the README that came with this package for format
and details about the configuration file.

=head1 DEPENDENCIES

This script requires the following perl packages that are available
from CPAN (www.cpan.org).

Getopt::Long;
use Config::Std;

=head1 INCOMPATIBILITIES

None reported.

=head1 BUGS AND LIMITATIONS

No bugs have been reported.

Please report any bugs or feature requests to:
<barry.moore@genetics.utah.edu>

=head1 AUTHOR

Barry Moore
<barry.moore@genetics.utah.edu>

=head1 LICENCE AND COPYRIGHT

Copyright (c) 2007, University of Utah

    This module is free software; you can redistribute it and/or
    modify it under the same terms as Perl itself.

=head1 DISCLAIMER OF WARRANTY

BECAUSE THIS SOFTWARE IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE SOFTWARE, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE SOFTWARE "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH
YOU. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR, OR CORRECTION.

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE SOFTWARE AS PERMITTED BY THE ABOVE LICENCE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE
THE SOFTWARE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
FAILURE OF THE SOFTWARE TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.

=cut
